Gold, silver, bronze, interference and hologram transfer foil
The transfer foils for the elegant finishing of raised motifs are very easy to use and create beautiful metallic effects. The right plaster for designing with the broom finish technique is our creative plaster. If you are working with stencils, use Marmorino.
Processing
Transfer foil adhesive is applied in a single layer with a velour roller, foam roller or a stencilling brush to the surfaces to be worked on. After a flash-off time of approx. 10 minutes, the transfer film is placed on the adhesive with the white side facing down and pressed down lightly. Use your fingers or a squeegee to press the transfer film onto the entire surface without creases. Wait at least 2 hours before removing the film. It is also possible to remove the transfer film the following day to achieve the best possible metallic effect.
Details
Available in these formats: 10 sheets each 32 x 21 cm, 1 roll 32 cm x 120 m.
Available colours: Gold, silver, bronze, interference, gold hologram, silver hologram.
Weight | N/A |
---|---|
Color | Gold, Silver, Bronze, Interference, Gold hologram, Silver hologram |
Format | 10 sheets 32 x 21 cm, 1 roll 32 cm x 120 m |