Impregnation for 2-component sealing

 16,90 72,00

Includes 20% VAT
Delivery Time: immediately available

Impregnation to prepare an ideal substrate for a coating with 2C sealing.

Clear
Add to wishlist
Add to wishlist
SKU: N/A Category:

Where is the impregnation used?

For a streak-free coating with 2-component sealers, prior impregnation is strongly recommended. The absorbency of the substrate is adjusted and the application of the sealant becomes much easier. The problem of traces of the roller is thus greatly minimized.

What exactly is the impregnation for 2K-sealers ?

Low emission, plasticizer-, solvent-free and odorless impregnation, for the pre-treatment of spatulated kitchen mirrors, for subsequent coating with the 2K-sealer glossy and matt.

Properties:

  • penetrates deeply into the material
  • consolidating the surface
  • adhesion-promoting
  • easy to apply
  • dries quickly

Application:

If required, dilute with up to 1 % water to avoid shiny spots. Apply with a painting roller and work in. Can also be applied by spraying. Do not use below +5°C object and air temperature. The tool is cleaned with water immediately after use.

Consumption:

Depending on the suction behaviour, the application is carried out once or twice. Per layer approx. 150-200 ml/m².

Drying:

Drying time of the impregnation is about 8 - 12 hours.

Storage:

seal the container tightly. Store in a cool and frost-free place.

Weight N/A
Content

1 Litre, 5 Litre