Here you will find sealings for the coating of floors and shower cabins

epoxidlack

Impregnation for 2 – component sealing

16,30€ – 70,10€

incl. VAT

plus shipping costs

Click here!

2K Epoxidlack

Glossy – Sealer

44,00€

incl. VAT

plus shipping costs

Click here!

2k-pur-versiegelung-1kg kombigebinde

Matt – Sealer

49,90€ – 122,90€

incl. VAT

plus shipping costs

Click here!

Versiegelung fuer Marmorputz in Nasszellen und Duschkabinen

Stucco wet room impregnation

30,95€ – 149,90€

incl. VAT

plus shipping costs

Click here!

Faltsieb

Paint sieve

0,90€

incl. VAT

plus shipping costs

Click here!

Abrollbehaelter

Paint tray

€2,10

incl. VAT

plus shipping costs

Click here!

Abrollgitter

Paint grid

2,10€

incl. VAT

plus shipping costs

Click here!

Lackrollerset

Paint roller with frame

10,80€

incl. VAT

plus shipping costs

Click here!

Velourwalze kaufen

Velour Roller with frame

€14,00

incl. VAT

plus shipping costs

Click here!

lackwalze-gross

Paint roller big for sealers

€9,80

incl. VAT

plus shipping costs

Click here!

Lackwalze superflock

Roller for Sealants

€7,50

incl. VAT

plus shipping costs

Click here!

Natursteinsilikon

Natural Stone Silicone

13,90€

incl. VAT

plus shipping costs

Click here!

Where are 2K sealants used?

  • Behind the stove for protection against fat splashes during cooking
  • On floors for easy-care cleaning.
  • In shower cubicles for a water-repellent coating.

How are 2-component sealants processed?

Stucco wet room impregnation can be applied by rolling, brushing, spraying or wiping, but can also be applied by airless airmix and electrostatic processes. For streak-free application with the 2-component sealant, impregnation is strongly recommended. Here you can buy the suitable impregnation. Mix the varnish and hardener (PUR or epoxy) in a suitable container for at least 3 minutes. Then pour the lacquer through the lacquer sieve into the lacquer tub and stir well again. A short pile roller with microfibres for glaze work is best suited to obtain a beautiful surface. The varnish is applied crosswise to minimise roller build-up. The material must be applied evenly and the use of a wiper grid or the paint tray is recommended. It is recommended to roll with a separate dry roller. A 2-coat application of the 2-component seal is recommended.

Here again the processing steps for the waterproof sealing of the marble plasters especially on floors or kitchen back walls:

  1. Impregnation
  2. 2-component sealing glossy oder 2-component sealant matt
  3. 2-component sealing glossy or 2-component sealant matt

Here you can find more details about the processing of Stucco wet room impregnation.

Special note

A silicone joint must be made between the worktop or shower tray and the wall to prevent the water from rising between the paint and the lime coating. ATTENTION: It is generally recommended to use a suitable natural stone silicone.

Do you have any further questions? Get in touch with us: To the contact form.